Chain Fence Calculator
A chain fence project needs exact counts of terminal posts, line posts, top rail, fabric, and tension bands. This free chain fence calculator builds a complete materials list from your linear feet, fence height, corner count, and gate count, then estimates total installed cost using 2025 Home Depot and Everbilt pricing plus regional labor adjustments.
How the Chain Fence Calculator Works
A chain link fence cost calculator uses simple rules:
- Line posts: (fence length - gates) / spacing, minus 1 end gap
- Terminal posts: 2 ends + corners + 2 per gate opening
- Top rail: continuous run along fence length, rounded up to 10 ft sections
- Fabric: total fence length minus gate openings
- Tension bands: at each terminal post, 1 per foot of fence height minus 1
Costs come from material price per linear foot (driven by fence height and coating) plus labor at about 40% of material, scaled by regional factor.
How Much Does 200 Ft of Chain Link Fence Cost
A 200 ft chain link fence at 6 ft tall with one walk gate runs $3,000-$5,000 installed in 2025. Vinyl-coated fabric (black or green) adds about 40% to fabric cost, bringing the range to $4,200-6,400. Labor is typically 40% of material cost since chain link installs much faster than wood or vinyl privacy fencing.
Chain Link Fence Parts Checklist
A complete chain link fence uses these chain link fence parts:
- Terminal posts at 2.375 in OD (end, corner, gate)
- Line posts at 1.625 in (or 1.875 in for commercial) OD
- Top rail at 1.25 in OD in 10 ft swedged sections
- Chain link fabric at 9 gauge galvanized (most common residential gauge)
- Tension bands at each terminal post
- Tension bars slid through fabric ends
- Rail ends connecting top rail to terminal posts
- Loop caps for line posts (top rail passes through)
- Post caps for terminal posts
- Tie wires securing fabric to line posts
- Gate hardware (hinges, latch, fork latch for double gates)
A chain link fence materials list for 150 ft at 6 ft tall with 2 corners and 1 walk gate:
- 6 terminal posts (2 end + 2 corner + 2 gate)
- 13-14 line posts (10 ft spacing)
- 150 ft top rail in 15 sections
- 150 ft of 9 gauge fabric
- 30 tension bands (5 per terminal post)
- 1 walk gate with hinges and latch
6 Ft Chain Link Fence Cost Per Foot Installed
6 ft chain link fence cost per foot installed averages $15-$35 per linear foot in 2025:
- Rural / low-cost: $15-20/ft
- Suburban average: $22-28/ft
- Urban coastal: $28-35/ft
- Vinyl-coated adds $5-7/ft over galvanized
Home Depot Chain Link Fence Calculator
The home depot chain link fence calculator on their site uses Everbilt SKU pricing. Our chain fence calculator uses the same reference prices for parts (Everbilt 9 gauge galvanized fabric, Everbilt 2.375 in terminal posts, Everbilt 1.625 in line posts) so your output should match a Home Depot pro desk quote within 5-10%.
A chain link fence calculator home depot result for 150 ft at 6 ft with 2 corners and 1 gate lands around $2,100-$2,800 materials only. Labor from a Home Depot Installation Services contractor adds $1,000-$2,000 depending on region.
Everbilt Chain Link Fence Calculator
The everbilt chain link fence calculator pulls the exact same parts list sold at Home Depot (Everbilt is Home Depot's house brand). Menards sells a comparable line under Hampton Steel. Lowe's sells Origin Point and Hampton Steel. All three retailers price within 5% of each other on 9 gauge galvanized fabric.
Free Chain Link Fence Calculator Usage
A free chain link fence calculator like this one is the fastest way to cross-check contractor quotes. Take the contractor's material list and enter your measurements here. If our output is more than 15% below the contractor's, ask them to itemize:
- Terminal vs line post count
- Fabric grade (check it is 9 gauge, not 11 gauge builder-grade)
- Top rail length (should match fence length)
- Post depth (3 ft for 6 ft fence with concrete is standard)
- Hardware (post caps, tension bands, rail ends)
6 Foot Chain Link Fence 100 Feet
A 6 foot chain link fence 100 feet long typically needs:
- 2 end posts + 2 gate posts = 4 terminal posts (if 1 gate, no corners)
- 9 line posts at 10 ft spacing
- 100 ft top rail in ten 10 ft sections
- 100 ft of 9 gauge fabric (one 100 ft roll)
- 20 tension bands (5 per terminal post for 6 ft)
- 1 walk gate frame, hinges, and latch
Total installed cost: $1,500-$3,500 depending on region and fabric coating.