Chain Link Fence Calculator
A chain link fence project needs terminal posts, line posts, top rail, fabric, tension bands, and hardware in specific quantities tied to fence length and height. This free chain link fence calculator builds a complete materials list from your linear feet, fence height, corner count, and gate count, then estimates installed cost per foot with regional labor adjustments.
How Much Does 200 Ft of Chain Link Fence Cost
A 200 ft chain link fence at 6 ft tall with one walk gate costs about $3,000-$6,000 installed in 2025, depending on region and fabric type. Galvanized mesh is cheapest; vinyl-coated (black or green) adds about 40% to fabric cost. Labor is typically 40% of material cost for chain link since it installs faster than wood or vinyl.
| Fence Length | Galvanized, 6 ft | Vinyl-coated, 6 ft |
|---|---|---|
| 100 ft | $1,500-2,500 | $2,100-3,200 |
| 150 ft | $2,250-3,700 | $3,200-4,800 |
| 200 ft | $3,000-5,000 | $4,200-6,400 |
| 300 ft | $4,500-7,500 | $6,300-9,600 |
6 Ft Chain Link Fence Cost Per Foot Installed
A 6 ft chain link fence cost per foot installed averages $15-$35 in 2025. The low end (about $15/ft) reflects rural areas with minimal prep. The average (about $22/ft) is the most common suburban installed price. Urban markets on the coasts run $28-35/ft installed.
6 Foot Chain Link Fence 100 Feet
A 6 foot chain link fence 100 feet long needs roughly:
- 11 line posts at 10 ft on-center (100 ft / 10 - 1 end gap)
- 2 end posts (terminal)
- 1 top rail run of 100 linear feet in ten 10 ft sections
- 100 linear feet of 9 gauge fabric (one 100 ft roll)
- 10 tension bands (5 per terminal post for a 6 ft fence)
- Tie wires, post caps, rail ends, and tension bars
Total installed cost: roughly $1,500-$3,500 depending on region.
Chain Link Fence Panels vs Roll Fabric
Chain link fence panels are pre-built sections (usually 6 or 8 ft wide) used for temporary or rental fences. They cost more per foot than roll fabric, but install in minutes without post setting. For a permanent residential fence, buy 9 gauge galvanized fabric in 50 or 100 ft rolls and drive or set the posts in concrete.
Chain Link Fence Privacy Slats
Chain link fence privacy slats thread vertically through the diamond mesh to convert an open chain link fence into a privacy fence. Slats come in vinyl or aluminum, cost $1-3 per linear foot of fence, and block 75-90% of the view depending on insert type. Bottom-lock slats are the most secure; top-lock are the cheapest.
Chain-Link Fence Menards vs Home Depot
Chain-link fence Menards and Home Depot prices are close for most items. In 2025:
- 9 gauge galvanized fabric 4 ft x 50 ft: $65-95
- 9 gauge galvanized fabric 6 ft x 50 ft: $105-155
- 2.375 in x 7 ft terminal post: $25-40
- 1.625 in x 7 ft line post: $15-22
- Top rail 10 ft x 1.25 in: $14-20
- Walk gate frame 3 ft x 6 ft: $110-160
- Menards everyday price tends to be 2-5% lower; Home Depot has larger 11%-rebate and paint card promotions.
The chain link fence calculator home depot offers on its site is tied to Everbilt material SKUs. The everbilt chain link fence calculator uses the same pricing Everbilt sells nationally; our calculator covers Home Depot, Menards, Lowe's, and independent supply houses.
Chain Link Fence Parts
A complete chain link fence includes these parts:
- Terminal posts (end, corner, gate) at 2.375 in OD
- Line posts at 1.625 in or 1.875 in OD
- Top rail at 1.25 in OD in 10 ft lengths
- Chain link fabric (9 gauge galvanized most common)
- Tension bands at each terminal post
- Tension bars slid through fabric ends
- Rail ends to connect top rail to terminal posts
- Loop caps for line posts (top rail passes through)
- Post caps for terminal posts
- Tie wires to secure fabric to line posts (about 1 per foot of height, every 24 in)
- Gate hardware (hinges, latch, fork latch for double gates)
Chain Link Fence Materials List
For a 150 ft chain link fence at 6 ft tall with 2 corners and 1 walk gate:
- 2 end posts + 2 corner posts + 2 gate posts = 6 terminal posts
- 14 line posts (10 ft spacing)
- 150 ft of top rail (15 sections of 10 ft)
- 150 ft of 9 gauge galvanized fabric
- 30 tension bands (5 per terminal post)
- 1 walk gate with hinges and latch
- Post caps, loop caps, rail ends, tie wires, tension bars
Chain Link Fence Cost Calculator vs Quote
Our chain link fence cost calculator gives a solid ballpark, but contractor quotes vary by:
- Terrain (slope, rocky soil adds 15-30%)
- Removal of existing fence ($3-6 per linear foot)
- Post holes in concrete or asphalt (add $15 per post)
- Permit fees ($25-$300)
- Access (tight yards add labor)
For precise pricing, get 3 quotes from local licensed fence contractors and compare their line-item material list against this calculator's output.