Fence Replacement Cost Calculator
Replacing a fence costs more than a fresh install because you pay to tear out and haul away the old one before new material goes in. This fence replacement cost calculator combines removal, new material, install labor, gate swaps, and permit fees into a single total so you can compare quotes and budget accurately. It covers wood, chain link, vinyl, aluminum, and composite fences.
Fence Replacement Cost by Material (2025)
Total replacement cost per linear foot including tear-out and new install at 6 ft height, average region:
| New Fence | Old Fence Removal | New Install | Total/LF |
|---|---|---|---|
| Pressure-treated pine | $5/LF | $28/LF | $33-50/LF |
| Cedar | $5/LF | $40/LF | $45-70/LF |
| Chain link (galvanized) | $4/LF | $17/LF | $21-38/LF |
| Vinyl / PVC | $5/LF | $54/LF | $59-95/LF |
| Aluminum ornamental | $6/LF | $48/LF | $54-85/LF |
| Composite (Trex/SimTek) | $5/LF | $77/LF | $82-115/LF |
How the Fence Replacement Cost Calculator Works
Total fence replacement cost has five components:
- Tear-out and haul-away: $4-6 per LF depending on old fence type (metal is hardest at $6/LF because of post and concrete removal)
- New material: dollars per LF times net length (minus gate openings)
- Install labor: 40-60% of material cost, depending on fence type
- Gate replacement: walk gates $200-550 each; drive gates 3-4x a walk gate
- Permit fee: $25-300 flat, depending on jurisdiction (many require permits for 6+ ft replacement)
Add them together for your total replacement cost. Divide by linear feet for cost per foot.
Wood Fence Replacement Cost Calculator
A wood fence replacement cost calculator helps estimate the cost to replace cedar or pressure-treated pine. Wood is the most common fence material and the most commonly replaced due to rot, warping, and storm damage. Typical total cost:
- Pressure-treated pine, 6 ft, 150 LF replacement: $4,500-7,500 total
- Cedar, 6 ft, 150 LF replacement: $6,500-10,500 total
- Old wood fence removal: $5 per LF average ($750 for 150 LF)
Wood fence replacement labor runs $10-25 per linear foot for new install (40-60% of material cost). Add $5/LF for the tear-out phase, bringing typical labor total to $15-30 per LF.
Chain Link Fence Replacement Cost
Chain link is the cheapest metal fence to replace at $21-38 per LF installed including tear-out. A 150 LF galvanized chain link replacement at 6 ft with one walk gate costs $3,000-5,500 total. Vinyl-coated fabric (black or green) adds $5-7 per LF to material cost.
Vinyl Fence Replacement Cost
Vinyl cracks and discolors from UV after 20-25 years. Replacement cost runs $59-95 per LF installed including old fence removal. A 150 LF vinyl replacement at 6 ft with one walk gate costs $8,500-13,500 total. Material cost is roughly 45% of the total; labor is 25-30%; removal is 5-8%; gates are 10-15%.
When to Repair vs Replace a Fence
Replace, do not repair, when any of these apply:
- More than 25-30% of posts are rotten or leaning
- More than 40% of pickets, boards, or panels need replacing
- The fence is over 15 years old (wood), 25 years old (vinyl), or 40 years old (aluminum)
- The fence leans more than 10 degrees in multiple places
- Property boundary has shifted or the fence is out of code compliance
- Repair cost will exceed 50% of new install cost
A 150 LF cedar fence costs $5,000-8,000 new. If repair estimates exceed $2,500-4,000, replacement is the better investment because it comes with a warranty and a fresh lifespan.
DIY vs Pro Fence Replacement
DIY fence replacement saves 40-60% on labor because labor is roughly half of total installed cost. Savings for a 150 LF cedar replacement:
- Pro replacement total: $6,500-10,500
- DIY (materials and removal only): $2,500-4,500
- DIY time: 3-5 weekends with 2 people, post-hole digger, string line, level, and circular saw
The tear-out phase is especially DIY-friendly: a sledgehammer, reciprocating saw, and a pickup truck or dumpster rental do most of it. Save pro labor for post setting, gate hanging, and concrete work.
Permits and HOA Approvals
Most municipalities require a permit for fence replacement over 6 ft tall or when the new fence differs in type, height, or location from the existing one. Typical permit fees:
- Small towns and rural counties: $25-75
- Suburban: $75-175
- Urban coastal: $150-300
HOA approval is separate and usually free but may require submitting plans, material samples, and property survey. Always check before starting: removing a fence without permit can trigger fines of $250-1,000.
Regional Cost Differences
Regional cost factors pulled from 2025 HomeAdvisor and Angi data:
- Rural / South / Midwest: 0.85x average (lower labor rates, easier permitting)
- Suburban national average: 1.0x
- Urban coastal (Bay Area, NYC, Boston, Seattle, DC, Miami): 1.25x average (higher labor and material costs, stricter permits)